View XPGWHT-H1-0000-00BE7_3882744.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product family data sheet copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 cld-ds20 rev 5 cree ? xlamp ? xp-g leds product description the xlamp xp-g l e d delivers un- precedented levels of light output and effcacy for a single die led. the xlamp xp-g l e d continues crees history of innovation in l eds for lighting applications with wide viewing angle, symmetrical pack - age, unlimited foor life and electri - cally neutral thermal path. xlamp xp-g l e ds are the ideal choice for lighting applications where high light output and maxi - mum effcacy are required, such as le d light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting. features ? available in white, outdoor white and 80-cri, 85-cri and 90-cri white ? ansi-compatible chromaticity bins ? maximum drive current: 1500 ma ? low thermal resistance: 4c/w ? wide viewing angle: 125 ? unlimited foor life at 30oc/85% rh ? refow solderable - jedec j-std-020c ? electrically neutral thermal path ? rohs and reach-compliant ? ul-recognized component (e326295) www . cree.com/xlamp table of contents flux characteristics .................... 2 characteristics .......................... 3 relative spectral power distribution ............................... 3 relative flux vs. junction temperature ............................. 4 e lectrical characteristics ............. 4 thermal design ......................... 5 relative flux vs. current ............ 5 relative chromaticity vs. current and temperature (warm white) ... 6 typical spatial distribution .......... 7 refow soldering characteristics .. 8 notes ....................................... 9 mechanical dimensions .............. 10 tape and reel .......................... 11 packaging ................................ 12
2 flux characteristics (t j = 25 c) the fo llowing table provides several base order codes for xlamp xp-g l e ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. color cct range base order codes min luminous flux @ 350 ma (lm) calculated minimum luminous flux (lm)* order code min. max. group flux (lm) 700 ma 1.0 a 1.5 a cool white 5,000 k 8,300 k r3 122 228 305 406 xp gwht-l1-0000-00f51 r4 130 243 325 433 xp gwht-l1-0000-00g51 r5 139 260 348 463 xp gwht-l1-0000-00h51 outdoor white 4,000 k 5,300 k r2 114 213 285 380 xp gwht-01-0000-00ec2 r3 122 228 305 406 xp gwht-01-0000-00fc2 r4 130 243 325 433 xp gwht-01-0000-00gc2 neutral white 3,700 k 5,000 k q5 107 200 268 356 xp gwht-l1-0000-00de4 r2 114 213 285 380 xp gwht-l1-0000-00ee4 r3 122 228 305 406 xp gwht-l1-0000-00fe4 80-cri white 2,600 k 4,300 k q3 93.9 175 235 313 xp gwht-h1-0000-00be7 q4 100 187 250 333 xp gwht-h1-0000-00ce7 q5 107 200 268 356 xp gwht-h1-0000-00de7 warm white 2,600 k 3,700 k q3 93.9 175 235 313 xp gwht-l1-0000-00be7 q4 100 187 250 333 xp gwht-l1-0000-00ce7 q5 107 200 268 356 xp gwht-l1-0000-00de7 85-cri white 2,600 k 3,200 k p3 73.9 138 185 246 xp gwht-p1-0000-008e7 p4 80.6 151 202 268 xp gwht-p1-0000-009e7 q2 87.4 163 219 291 xp gwht-p1-0000-00ae7 q3 93.9 175 235 313 xp gwht-p1-0000-00be7 90-cri white 2,600 k 3,200 k p3 73.9 138 185 246 xp gwht-u1-0000-008e7 p4 80.6 151 202 268 xp gwht-u1-0000-009e7 q2 87.4 163 219 291 xp gwht-u1-0000-00ae7 notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements. ? typical cri for cool white and neutral white (3,700 k - 10,000 k cct) is 75. ? typical cri for outdoor white (4,000 k - 5,300 k cct) is 70. ? typical cri for warm white (2,600 k - 3,700 k cct) is 80. ? minimum cri for 80-cri white is 80. ? minimum cri for 85-cri white is 85. ? minimum cri for 90-cri white is 90. ? calculated fux values are for reference only copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
3 characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 4 viewing angle (fwhm) degrees 125 temperature coeffcient of voltage mv/c -2.1 esd classifcation (hbm per mil-std-883d) class 2 dc forward current ma 1500 reverse voltage v 5 forward voltage (@ 350 ma) v 3.0 3.75 forward voltage (@ 700 ma) v 3.2 forward voltage (@ 1000 ma) v 3.3 le d junction temperature c 150 relative spectral power distribution 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) 5000k - 8300k cct 3700k - 5000k cct 2600k - 3700k cct copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
4 relative flux vs. junction temperature (i f = 350 ma) electrical characteristics (t j = 25c) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) junction temperature (c) 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 forward current (ma) forward voltage (v) copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
5 thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. relative flux vs. current (t j = 25c) 0 200 400 600 800 1000 1200 1400 1600 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w rj-a = 10c/w rj-a = 15c/w rj-a = 20c/w rj-a = 25c/w 0% 50% 100% 150% 200% 250% 300% 350% 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 relative luminous flux (%) forward current (ma) copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
6 relative chromaticity vs current and temperature (warm white*) * warm white xlamp x p -g leds have a typical cri of 80 delta cct vs. current - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 100 300 500 700 900 1100 1300 1500 current (ma) ccx ccy delta cct vs temp - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
7 typical spatial distribution 0 20 40 60 80 100 120 - 100 - 80 - 60 - 40 - 20 0 20 40 60 80 100 relative luminous intensity (%) angle (o) copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
8 reflow soldering characteristics in testing, cree has found xlamp x p -g leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all p cb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3c/second max. 3c/second max. p reheat: temperature min (ts min ) 100c 150c p reheat: temperature max (ts max ) 150c 200c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183c 217c time maintained above: time (t l ) 60-150 seconds 60-150 seconds p eak/classifcation temperature (tp) 215c 260c time within 5c of actual p eak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6c/second max. 6c/second max time 25c to p eak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface. t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
9 notes lumen maintenance projections cree currently recommends a maximum drive current of 1000 ma for xlamp xp-g white in designs seeking the energy star* 35,000 hour lifetime rating ( 94.1% luminous fux @ 6000 hours) or 25,000-hour lifetime rating ( 91.8% luminous fux @ 6000 hours). p lease read the xlamp long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. p lease read the xlamp thermal management application note for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. * these lifetime ratings are based on the current ene rgy star solid state lighting luminaires v 1.1 (december 12, 2008) and ene rgy star integral led lamps v1.0 (december 3, 2009) lumen maintenance criteria. moisture sensitivity in testing, cree has found xlamp x p -g leds to have unlimited foor life in conditions 30oc / 85% relative humidity (rh). moisture testing included a 168 hour soak at 85oc / 85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. rohs compliance the levels of environmentally sensitive, persistent biologically toxic ( p bt), persistent organic pollutants (pop ), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim warning: do not look at exposed lamp in operation. eye injury can result. see led eye safety at http://www.cree. com/products/pdf/xlamp_eyesafety.pdf. copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
10 .60 1.60 1.65 .65 2.00 3.45 3.45 .40 .60 3.20 1.20 .40 .40 3.20 (hatched area is opening) recommended stencil pattern recommended pcb solder pad 3.30 3.30 1.30 .50 .50 .50 .40 2.30 3.30 .50 1.30 .50 .73 2.6 side view top view bottom view all measurements are .13mm unless otherwise indicated mechanical dimensions (t a = 25c) all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 2.3 0.5 1.3 3.3 2 3.45 3.45 0.58 0.5 3.3 3.3 0.5 0.5 0.4 0.5 1.3 2.3 3.2 3.2 0.6 1.2 0.4 0.4 0.4 2.4 1 / 1 25.000 b 2601-00005 xpg top level customer drawing b. stanton 8/28/09 d. seibel revisons rev description by date app'd a release dds 8/28/09 b removed detail dds 2/24/10 recommended stencil pattern shaded area is open recommended pcb solder pad 20.000 scale 20.000 scale size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 2.3 0.5 1.3 3.3 2 3.45 3.45 0.58 0.5 3.3 3.3 0.5 0.5 0.4 0.5 1.3 2.3 3.2 3.2 0.6 1.2 0.4 0.4 0.4 2.4 1 / 1 25.000 a 2601-00005 xpg top level customer drawing 8/28/09 d. seibel revisons rev description by date app'd a release dds 8/28/09 recommended stencil pattern shaded area is open recommended pcb solder pad 20.000 scale 20.000 scale copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
11 tape and reel all dimensions in mm. loaded pockets (1,000 lamps) leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) start end cathode side anode side (denoted by + and circle) 160.0 a a b 2.5 .1 section a-a scale 2 : 1 1.5 .1 8.0 .1 4.0 .1 1.75 .10 12.0 .0 + .3 detail b scale 2 : 1 13 mm 7" cover tape pocket tape user feed direction user feed direction size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 b b +.10/-00 1.50 2.10 +.10/-.00 3.75 +.10/-.00 4.39 +.10/-.00 8.7 8.00 .10 4.00 .10 2.00 .10 +.10/-.00 1.50 +.10/-.00 1.50 .30 .10 3.75 +.10/-.00 4.39 +.10/.00 12.00 nominal 12.30 max 5.50 .10 1.75 .10 10.25 .10 revisons rev description by date app'd a released j.l. 6/30/09 c match supplier drawing dds 10/21/10 y.gan d zone a6, 2.15 was 2.1, tolerance was .10 . zone c2, added pocket dimensions. dds 12/2/10 y.gan e zone a6, 2.10 was 2.15 dds 1/3/11 j.m. f zone b5, added tolerance to 4.39 and 3.75. dds 8/26/11 j.m. 1 / 1 4.000 f 2402-00003 carrier tape, xpe 6/30/09 d. seibel notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2mm b-b section copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds
12 packaging all dimensions in mm. cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # copyright ? 2009-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc. xlamp xp-g leds

▲Up To Search▲

Price & Availability of XPGWHT-H1-0000-00BE7

	To Download XPGWHT-H1-0000-00BE7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .